Paving Industry

Industrial production of concrete blocks demands the adherence to high standards from the manufacturing systems that are used. The aim is to ensure a constantly high and repeatable concrete quality for many years even with a high throughput. Therefore the PLYPO Pave production pallets with their excellent properties are a reliable component of international manufacturing of concrete blocks.

The advantages of PLYPO Formwork

  • Excellent compaction characteristics
    Due to the new construction design of the pallet, the bandwidth of compaction tolerances of the concrete products is limited to a minimum, uniform heights and consistencies are the consequence.
  • Minimal deflection
    Even under highest loads, PLYPO Formwork pallets show a minimal deflection due to the very load-bearing core. The thickness of the pallets is adjusted to the production conditions of each customer. So even after many years of use, the deflection will not exceed the requested maximum deflection.
  • Effective and cost-saving utilisation
    The low net weight of the PLYPO Formwork production pallet leads to energy savings during the transportation through the machine cycle. Cycle times are reduced as there are no withdrawal plates, so this increases the efficiency of production.
  • Constant properties for repeatable concrete block quality
    The constant properties of the PLYPO Formwork production pallet are maintained over a long period of time – also with high humidity in air-conditioned chambers as well as during the production of washed concrete products.